Running Toilet: Fix It Yourself or Call a Plumber?
Short answer: Most running toilets are caused by a worn flapper, a tangled chain or a fill valve set too high. These are simple fixes you can often do yourself. Call a plumber if the tank or valve is cracked, or the problem keeps coming back.

Step-by-step
- Take the tank lid off and look at the chain. If it’s tangled or too tight, adjust it.
- Check the water level. If it’s spilling into the overflow tube, lower the float.
- Press the flapper down. If the running stops, the flapper is worn. Replace it.
- If water keeps hissing in, the fill valve may need replacing.
Why it matters
A running toilet can waste a large amount of water every day and quietly raise your bill. During Arvada drought restrictions, every leak counts. See Arvada water-saving programs.
Call a plumber when
- The tank or bowl is cracked
- Water leaks at the base
- Parts are corroded or the shut-off valve leaks
- You’ve replaced parts and it still runs
Rather not DIY? Call to discuss your plumbing problem.
Parts and what they do
| Part | Job | Sign it has failed |
|---|---|---|
| Flapper | Seals the tank so water stays in | Toilet refills on its own |
| Chain | Lifts the flapper when you flush | Flush is weak or flapper will not close |
| Fill valve | Refills the tank | Hissing, slow fill, or water never stops |
| Float | Tells the fill valve when to stop | Water runs into the overflow tube |
| Overflow tube | Safety drain inside the tank | Cracked tube means constant running |
Buying the right flapper
Flappers come in 2-inch and 3-inch sizes, and some brands use their own design. Take the old flapper to the store, or note the toilet brand and model number printed inside the tank.
How much water a running toilet wastes
A toilet that runs all the time can waste a large amount of water every day, enough to show up clearly on your bill. During Arvada drought restrictions, fixing it is one of the easiest ways to save water.
Related pages
Frequently asked questions
Why does my toilet run for a few seconds every so often?
Usually a slow flapper leak. Water drips into the bowl until the tank refills briefly.
Is it safe to replace a fill valve myself?
For most people, yes. Shut off the water and follow the instructions. Call if the shut-off valve leaks.
Running toilet troubleshooting chart
| What you hear or see | Fix |
|---|---|
| Water trickles into the bowl | Replace the flapper |
| Water flows into the overflow tube | Lower the float |
| Hissing that never stops | Replace the fill valve |
| Tank refills every 15 β 30 minutes | Flapper leak |
| Handle stays down | Adjust the chain or replace the handle |
Tools you need
- Towel or sponge to empty the tank
- Replacement flapper or fill valve
- Adjustable wrench
- Food coloring for the leak test
Key takeaways
- Most running toilets need a new flapper, chain adjustment or fill valve.
- The food coloring test confirms a flapper leak in 15 minutes.
- Fixing a running toilet is one of the easiest ways to cut water use.
- Call a plumber if the tank is cracked or the shut-off valve leaks.
If you have replaced the flapper and the toilet still runs, the flush valve seat may be worn or the overflow tube may be cracked. Both are common in older toilets and are often a sign that replacement is the better value.
Running toilets are one of the most common small repairs, whether you live in Candelas or the 80004 area.
Talk to a local Arvada plumber today.
Talk with a local Arvada plumbing pro about your problem and your options.





