Backflow Testing & Repair in Arvada, CO

Short answer: A backflow preventer stops irrigation water from flowing back into your drinking water. Most Arvada homes with sprinkler systems have one outside, and it is one of the first things to crack in a hard freeze if it isn’t drained in fall.

Plumber adjusting a valve on a backflow assembly โ€“ Backflow Testing & Repair in Arvada

What a backflow preventer does

Sprinkler lines sit in soil with fertilizer and pesticides. If water pressure drops in the city main, that water could be pulled back into your home’s supply. The backflow preventer is a one-way valve assembly that blocks this.

Services

  • Annual or required backflow testing
  • Repair of leaking or cracked assemblies
  • Replacement after freeze damage
  • Fall shutdown and draining as part of sprinkler winterization
  • Spring start-up and leak check

Signs of backflow damage

  • Water spraying from the assembly when you turn sprinklers on in spring
  • Cracked brass body or popped test cocks
  • Low pressure in sprinkler zones

Freeze tip

Shut off the irrigation supply and drain the backflow preventer before the first hard freeze, usually in October in Arvada. An insulated cover adds extra protection.

Is testing required?

Testing rules depend on your water provider and the type of assembly. Check with your provider, or call and a local plumber can help you find out. See Arvada water providers.

What Happens During a Backflow Test

A backflow test checks that the valves inside your assembly close properly and hold pressure, so irrigation water cannot be pulled back into your drinking water. A certified tester connects a gauge kit to the test ports, runs through each check, and records the readings. A typical residential test takes well under an hour.

If the assembly passes, you get a report you can keep or file with your water provider. If it fails, ask which part failed and get a repair quote before anything is done.

Why Backflow Preventers Fail in Arvada

  • Freeze damage. An assembly that was not drained before a hard freeze can crack its body or bonnet.
  • Worn seals and springs. Rubber parts wear out with age and seasonal start-ups.
  • Debris. Sand or scale can keep a check valve from seating.
  • Physical damage. Lawn mowers, landscaping and kidsโ€™ games are hard on outdoor assemblies.

Testing Requirements and Your Water Provider

Testable backflow assemblies are regulated in Colorado, and many water providers require them to be tested on a schedule, often every year, with results reported. Requirements can differ depending on whether you are served by the City of Arvada or another district. If you are not sure, check our water and sewer district guide or ask when you call.

Pair Your Test With Winterization

The easiest time to test is during spring start-up or right before fall shut-down. A plumber can test the assembly, blow out the lines, and drain the backflow so it is protected from the cold. See sprinkler winterization and when to winterize sprinklers in Arvada.

Backflow Repair vs Replacement

Most failed tests are fixed with a rebuild kit: new rubber seals, springs or a check valve. That is usually far less than replacing the whole assembly. Replacement makes sense when the body is cracked from freezing, parts are no longer available for an older model, or the assembly was never the right type for the system. Either way, ask for a written quote before work starts, and ask for a retest after the repair so you have a passing report.

Commercial and HOA Properties

Businesses, HOAs and multi-unit buildings around Arvada often have larger assemblies on fire lines and irrigation systems. A plumber can test, repair and document those too, and keep a reminder schedule so annual tests do not slip through the cracks. See commercial plumbing for more.

Backflow leaking? Call to discuss your plumbing problem.

Backflow Testing Around Arvada

AreaCommon problems
Olde Town & south Arvada (80002, 80003)Older irrigation backflow assemblies near the foundation
Ralston Valley & West Woods (80004, 80005)Large-lot sprinkler systems with annual testing needs
Lake Arbor & central Arvada (80003)Backflow devices mounted high on house walls
Candelas, Leyden Rock & Whisper Creek (80007)HOA and newer systems with testing schedules

Backflow devices and lawn sprinklers fall under Arvada permit rules. Test in spring when you start the system, and drain or blow it out before the first hard freeze.

Talk to a Local Arvada Plumber First

Free phone consultation. Describe the problem, ask your questions, then decide. No pressure and no obligation.

  • โœ… Open 24/7 for leaks, backups and no-heat water emergencies
  • โœ… Written quote before work starts, with repair and replace options side by side
  • โœ… City of Arvada permits pulled when the job requires one
  • โœ… Ask for a Colorado license number and proof of insurance before anyone starts
  • โœ… No membership required to get help

Serving Olde Town, Ralston Valley, West Woods, Lake Arbor, Candelas, Leyden Rock and Whisper Creek ยท ZIPs 80002, 80003, 80004, 80005, 80007

Before you book: how to compare plumbing quotes ยท water line repair ยท about this site

Backflow FAQs

Why did my backflow preventer crack?

Water left inside froze and expanded. Draining it in fall prevents this.

Can I replace the backflow myself?

Installation may need a permit and certified testing, so most homeowners hire a plumber.

How do I know my backflow froze?

Water sprays or leaks from the assembly when you turn the supply on in spring.

Can I insulate my backflow instead of draining it?

Insulation helps, but draining is still the best protection.

How often should a backflow preventer be tested?

Yearly testing is common. Your water provider may send a notice when your test is due.

Why did my backflow preventer crack?

Most cracks happen when water is left in the device through a freeze. Proper winterization prevents this.

Is a backflow preventer required for sprinklers?

Yes, lawn irrigation systems connected to drinking water generally need one.

Types of backflow assemblies

TypeWhere you see itFreeze risk
Pressure vacuum breaker (PVB)Above ground near the house, common on sprinklersHigh if not drained
Reduced pressure zone (RPZ)Commercial and higher-risk connectionsHigh if not protected
Double check valveOften in a box below groundLower, but can still freeze

Spring start-up steps

  1. Make sure the backflow test cocks and valves are closed.
  2. Open the irrigation supply slowly.
  3. Check the assembly for leaks or spraying.
  4. Run each zone and look for broken heads.

Opening the supply too fast can cause water hammer and crack fittings.

Freeze damage repair

If your backflow preventer cracked over winter, a plumber can usually replace the damaged part or the full assembly the same day. The system is then pressure-checked before you start watering.

Related pages

Beat the first hard freeze. Book early.

Talk with a local Arvada plumbing pro about your problem and your options.