Hydro Jetting in Arvada, CO

Short answer: Hydro jetting uses high-pressure water to scour grease, scale and roots from the inside of your sewer line. It cleans more thoroughly than a cable, but it’s only safe on pipe in good enough condition, so the line should get a camera check first.

Plumber clearing a drain under a kitchen sink – Hydro Jetting in Arvada

Snaking vs hydro jetting

Cable snakingHydro jetting
What it doesPunches through the clogCleans the full pipe wall
Best forSimple, one-time clogsRepeat clogs, grease, roots
Results lastShorterLonger
Pipe condition neededMost pipesSound pipe, checked by camera

When hydro jetting makes sense

  • Kitchen lines with heavy grease
  • Main lines that clog again and again
  • Root intrusion before a repair
  • Scale build-up in older cast iron

Is Hydro Jetting Safe for Older Arvada Sewer Lines?

Usually, yes, but only after a camera look first. Many homes in Olde Town and south Arvada still have clay tile or cast-iron sewer pipe, and the region’s expansive clay soil can crack or shift those lines over time. High-pressure water is great at cutting grease and roots, but it should not be aimed at a pipe that is already broken.

That is why every jetting job starts with a sewer camera inspection. If the line is sound, it can be jetted. If the camera shows a collapsed section, an offset joint or missing pipe, the plumber should stop, show you the footage, and talk about a repair instead. Jetting a broken line just washes soil into it.

Hydro Jetting for Tree Roots

Roots find their way into clay pipe joints looking for water. A cable machine can punch a hole through them, but it often leaves the root mass behind, and it grows back fast. A jetter with a rotating cutting nozzle scours the pipe wall and flushes the debris all the way to the city main.

Roots will come back eventually as long as the joint is open. After jetting, your options usually include:

  • Maintenance jetting every one to two years if the pipe is otherwise in good shape
  • Spot repair or lining of the joints where roots keep getting in
  • Full replacement only when the camera shows the line is failing along its length

How Often Should a Drain Line Be Jetted?

Most homes never need it. A clean, healthy sewer line can go decades without anything more than an occasional snaking. Jetting on a schedule makes sense for homes with known root problems, heavy kitchen use, older clay or cast-iron pipe, or a line with a slight belly where debris settles. Rentals and multi-unit buildings are also good candidates, since you do not control what goes down the drains.

Hydro Jetting vs Chemical Drain Cleaners

Store-bought drain chemicals can loosen a small hair clog in a bathroom sink, but they do very little for grease buildup or roots in a main line. Some of them generate heat that is hard on older pipes and on the seals inside fixtures. And if a plumber has to open the line afterward, standing chemical water is a safety hazard. If a drain keeps clogging, the fix is mechanical, not chemical.

Keeping the Line Clear After Jetting

  • Wipe greasy pans with a paper towel before washing
  • Never flush wipes, even ones labeled β€œflushable”
  • Use strainers in tub and shower drains
  • Run hot water after using the garbage disposal
  • Call at the first sign of a slow drain or gurgling, before it becomes a backup

Line keeps clogging? Call to discuss your plumbing problem.

Hydro Jetting Around Arvada

AreaCommon problems
Olde Town & south Arvada (80002, 80003)Roots in clay-tile laterals that keep coming back after cabling
Ralston Valley & West Woods (80004, 80005)Grease and scale buildup in cast-iron kitchen and main lines
Lake Arbor & central Arvada (80003)Repeat main line clogs where a cable only punches a hole through the blockage
Candelas, Leyden Rock & Whisper Creek (80007)Construction debris and grease in newer lines, usually not needed often

Hydro jetting is strong, so the line should be checked with a camera first. Very old or cracked clay and cast-iron pipe may need repair before jetting, not after.

Related Arvada guides: Holiday drain clogs

Talk to a Local Arvada Plumber First

Free phone consultation. Describe the problem, ask your questions, then decide. No pressure and no obligation.

  • βœ… Open 24/7 for leaks, backups and no-heat water emergencies
  • βœ… Written quote before work starts, with repair and replace options side by side
  • βœ… City of Arvada permits pulled when the job requires one
  • βœ… Ask for a Colorado license number and proof of insurance before anyone starts
  • βœ… No membership required to get help

Serving Olde Town, Ralston Valley, West Woods, Lake Arbor, Candelas, Leyden Rock and Whisper Creek Β· ZIPs 80002, 80003, 80004, 80005, 80007

Before you book: how to compare plumbing quotes Β· water line repair Β· about this site

Hydro Jetting FAQs

Can hydro jetting damage pipes?

It can on cracked or badly deteriorated pipe. That’s why the line should get a camera check first.

Does hydro jetting remove roots for good?

It cuts them out, but roots grow back through open joints until the pipe is repaired.

How long does hydro jetting take?

Most homes take one to two hours, including camera checks.

How often should I jet my line?

Only when needed. Lines with roots or heavy grease may need it every 12 to 24 months until the cause is fixed.

Is hydro jetting safe for old pipes?

It is safe for most lines in fair condition. A camera inspection first shows whether an old clay or cast-iron pipe can handle it.

How is hydro jetting different from snaking a drain?

A snake cuts a path through the clog. Hydro jetting scours the full pipe wall, removing grease, scale and roots more completely.

How long do results from hydro jetting last?

Grease and scale often stay away much longer than after cabling. Roots can return, so lines with root problems may need periodic maintenance.

What happens during a hydro jetting visit

  1. The plumber finds the best access point, usually a cleanout outside or in the basement.
  2. A camera inspection checks the pipe condition first.
  3. The jetter head is fed into the line. Rear-facing jets pull it forward while scouring the walls.
  4. The full length of the line is cleaned to the city main.
  5. A second camera pass confirms the line is clean.

Signs you need jetting, not just snaking

  • The same line has been snaked more than once in a year
  • Kitchen drains slow down again weeks after clearing
  • Camera shows grease coating or scale along the pipe
  • Roots keep returning at the same joints

Grease and Arvada kitchens

Grease cools and hardens inside the kitchen line and the main. Snaking pokes a hole through it, but the coating stays and catches food and soap again. Jetting removes the coating. After jetting, keeping grease out of the sink makes the results last much longer.

Related pages

Get the footage before you sign anything.

Talk with a local Arvada plumbing pro about your problem and your options.