Plumbing Equipment & Technology

Short answer: Good tools help plumbers find problems faster and open fewer walls and yards. Here is what plumbers commonly use on Arvada jobs and why it matters for you.

Plumber using a leak detection instrument โ€“ Plumbing Equipment & Technology
EquipmentWhat it doesWhy it helps you
Sewer inspection cameraRecords video inside drain and sewer linesYou see the problem before agreeing to a repair
Line locatorFinds the exact depth and location of the pipeSmaller digs, less yard damage
Hydro jetterCleans pipe walls with high-pressure waterLonger-lasting results than snaking
Drain machines and cuttersClear clogs and rootsFast fix for most drain problems
Acoustic leak detectorHears water escaping under pressureFinds hidden leaks without guessing
Thermal cameraShows temperature changes from leaksFinds hot-water and slab leaks
Moisture meterMeasures water in walls and floorsConfirms the leak area
Pressure test gaugesTests water and gas linesConfirms the repair is tight

Related services

Questions about a job? Call and ask what tools will be used.

Why the right tools save you money

Plumbing used to involve a lot of guessing: open a wall here, dig a hole there, and hope. Today, cameras, locators and acoustic tools let plumbers confirm the problem first. That means smaller repairs, less damage to finished walls and yards, and fewer return visits.

How each tool is used on a job

Sewer camera and locator

The camera shows the inside of the pipe, and a small transmitter on the camera head lets the plumber mark the exact spot and depth on the ground above. If a repair is needed, the plumber can dig in one place instead of trenching the whole yard.

Hydro jetter

After a camera check confirms the pipe is sound, the jetter scours grease, scale and roots from the pipe wall. This lasts longer than snaking because it cleans the full diameter of the pipe.

Leak detection tools

Acoustic listening, thermal imaging and moisture meters work together. One finds the sound of escaping water, another shows temperature changes, and the third confirms wet materials. Together they narrow a leak down to a small area.

Pressure gauges

After repairs on water or gas lines, the system is pressure-tested to confirm the repair is tight before the plumber leaves and before inspection.

Related pages

Protecting your home during the work

Good tools only help if they are used carefully inside your house. Here is what you can expect on every visit:

  • Floor protection first. Drop cloths go down from the door to the work area before any tools come in.
  • Clean cables and camera heads. Drain cables and sewer cameras are wiped down after every sewer job, so nothing from your main line ends up in a kitchen sink.
  • The right pressure for the pipe. Hydro jetting is matched to the pipe material and condition. Old clay or thin cast iron gets a camera check before it is jetted.
  • Shut-offs tested before work starts. If your main or fixture valve does not close fully, the plumber should tell you before opening any lines.
  • Old parts shown to you. Ask to see the failed part, and keep it for an insurance claim.

Why rented equipment can slow a job

Rented machines show up with unknown wear and the wrong attachments, which slows the job and adds to your bill. Ask whether the plumber owns their sewer camera, locator and jetter. When a job needs a specialty tool, such as a pipe-bursting rig for a trenchless sewer replacement, ask for it to be included in the written quote.

Why camera footage matters to you

A sewer camera inspection shows the inside of the line, the distance to each problem and, with a locator, the depth. That footage helps you understand the repair, compare quotes and share the findings with an insurer or a buyer. Ask for a copy of the video with notes on what was found and where.

Matching the tool to the problem

Not every clog needs the biggest machine. A small drum cable is usually enough for a sink or tub. Main line clogs often call for a larger cable machine. Grease and recurring roots may need hydro jetting. Leak detection uses acoustic listening, thermal imaging and pressure tests to find a leak before opening walls or floors.

  • Sink and tub clogs: hand auger or small drum machine
  • Main line clogs: sectional or large drum cable
  • Grease and recurring roots: hydro jetting
  • Hidden leaks: acoustic and thermal detection
  • Locating lines: transmitter and receiver

Frequently asked questions

Can I watch the camera footage?

Yes. Ask to watch it and get a copy.

Talk to a local Arvada plumber today.

Talk with a local Arvada plumbing pro about your problem and your options.